Castrol Tribol CH 1430 Spray High-temperature chain oil 400ml

Castrol Tribol CH 1430 Spray High-temperature chain oil 400ml

77.35 AED

Castrol Tribol CH 1430 Spray (400 ml) is a high-temperature chain oil formulated with a heat-resistant aromatic ester base and anti-wear/rust inhibitors, designed for lubrication of chains operating in extreme heat up to ~240 °C (short peaks up to ~270 °C) with excellent wetting, adhesion and extended lubrication intervals

Categories: , , , Brand:

Description

Castrol Tribol™ CH 1430 Spray (previously called Tribol 1430 Spray) high-temperature chain oil is formulated for the lubrication of oven chains for temperatures up to 240 °C (short term max. 270 °C). The low evaporation tendency of the high-quality aromatic ester synthetic base fluid ensures extended lubrication intervals as well as a clean and economic application.

Application
  • Tribol CH 1430 high-temperature chain oil is especially recommended for chain lubrication at temperatures up to 240 °C with short term maximum temperature of 270 °C
  • It is used for the lubrication of oven chains in lithographic printing plants and in the coating industry, as well as in drying ovens in the automotive industry.
  • It may be applied by drip, spray, splash and pressurized lubricating systems compatible with oils of this viscosity.
Advantages
  • The good evaporation characteristics of Tribol 1430 Spray can often reduce the lubricant amount to be applied and/or extend the interval between reapplication
  • Reduced applications minimize soiling due to dripping or “blow-off”
  • Excellent fluid film and anti-wear properties control chain wear
  • Self-cleaning action all but eliminates the need to stop production to periodically clean some equipment
  • Tribol 1430 Spray also tends to dissolve and facilitate the removal of carbonaceous residues left by previous lubricants
  • Fire and explosion hazards are greatly reduced. The ignition temperature far exceeds that of petroleum products
  • Low residue forming properties – any residues formed are still fluid and have lubricating properties
  • Compatible with the following sealing materials: Fluoroelastomers, silicone rubber, nitrile rubber (with more than 30%, acrylonitrile) and EPDM-elastomers
  • Excellent wetting and adhesive properties
  • Cost reductions may be achieved by reduced friction, extended lubrication cycles, reduced soiling, decreased downtime for repairs and maintenance and longer service life of machine components
Technical specifications
  • Density at 15°C: 949 kg/m3
  • Kinematic Viscosity at 40°C: 150 mm²/s
  • Kinematic Viscosity at 100°C: 17.1 mm²/s
  • Viscosity Index: 124
  • Flash Point – open cup method: 268°C
  • Pour Point: -33°C
  • Volume: 400ml spray can
  • Also available in: 20l canister​, 60l barrel, 208l barrel
  • GLIS number: 15E1B3
  • MSDS code: 468655

Castrol Tribol CH™ 1430, CH1430, CH-1430

Hazards (CLP)

 

Signal word: Danger

Hazard statements
  • H222, H229: Extremely flammable aerosol. Pressurized container: May burst if heated.
  • H319: Causes serious eye irritation.
Precautionary statements
Prevention:
  • P280: Wear eye protection or face protection.
  • P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P264: Wash hands thoroughly after use.

Related products