Description
Application
- Optigear Synthetic RO 150 can be used for all types of spur gear teeth, also under difficult load conditions.
- Bevel gear units, including those with a large offset (hypoid) and heavy alternating loads.
- All types of roller bearings, with heavy loads and low and high temperatures.
- Can be used in a very broad range of temperatures (no preheating needed in winter).
- Dip lubrication at high numbers of revolutions, as well as injection and oil mist lubrication.
- Filtering (mechanical) does not result in any additive loss.
- Not for synchronised gears or limited slip differentials due to low friction coefficients.
Specifications / Approvals
- DIN 51517-3 (CLP)
Advantages
- High pressure absorption and excellent wear protection¹
- Safe bearing lubrication in high- and low-temperature ranges
- High seizure load-bearing capacity¹
- Above-average application times – even under difficult conditions¹
- Reduction of friction coefficient and operating temperature¹
- Good corrosion protection¹
- Long service life for gears¹
- Exceeds requirements regarding wear protection in line with DIN 51517, part 3
¹ When compared to conventional gear oils
Technical specifications
- Colour: Blue green fluid
- Density @ 15°C / 59°F kg/m³: 868
- Kinematic Viscosity @ 40°C / 104°F mm²/s: 150
- Kinematic Viscosity @ 100°C / 212°F mm²/s: 18.0
- Viscosity Index :130
- Pour Point °C/°F: -45 – 49
- Rust test – distilled water (24 hrs) : Pass
- Copper corrosion (24 hrs@100°C/212°F): 1
- Flash Point – open cup method °C/°F: 210 / 410
- Size: 208l
- Packaging type: barrel
- Also available in: 20l canister
- GLIS number: 1540EF
- MSDS code: 465036
